Product Overview

The XST-235-7H1 is a steam-free leather seam pressing machine developed in-house for the seam-opening operation on leather garments. It replaces steam with controlled heat, which helps prevent the deformation and discoloration that steam can cause on leather surfaces. The pressing stroke is continuous, and the rated speed of 100 mm/s is adjustable, so the machine follows seams at a steady, controllable pace.

Seam opening on leather has traditionally been finished by hand. This machine automates the step: it opens the seam and presses it flat in a controlled machine pass, bringing automation to a workstation that previously depended on manual ironing skill. On finished garments such as leather jackets, every joined seam needs this opening-and-flat-pressing pass before the garment moves on.

With precision temperature control that adapts to multiple fabric types, the unit serves leather garment lines first, and can also be set for other fabrics within its 5-20 mm pressing width where steam must stay away from the material.

Core Features & Customer Value

Features and the value they add in daily production:

Purpose-Built for Leather Seam Opening

The pressing assembly is designed for the seam-opening operation on leather garments. Seam opening is automatic, and the manufacturer lists energy-saving operation among the design benefits. Automatic seam opening also removes a separate hand-opening pass, so the seam moves from stitching to pressing in one flow.

Steam-Free Seam Pressing for Surface Protection

The machine presses without steam. On leather and coated fabrics, steam and moisture can deform the material or shift its color; dry pressing helps the seam stay flat while the surface keeps its original look.

Precision Temperature Control for Multiple Fabrics

Temperature is controlled with precision, so the pressing set point can be matched to the fabric at hand. Leather is the primary application, and the same control supports a range of other materials.

About 3 Minutes to Get Started

According to the manufacturer, an operator can learn basic operation in about 3 minutes. Short onboarding keeps training costs low and reduces the line's dependence on scarce hand-finishing skills.

Working Principle

The XST-235-7H1 sets seams by controlled heat and pressure rather than steam. The machine opens the seam automatically, then presses it with a temperature-controlled assembly, so the seam is flattened without moisture contacting the leather surface. Heat, rather than moisture, does the setting work, so the seam leaves the station flat and dry.

Two 100 W servo motors in a dual-servo configuration drive the motion, and the machine operates on compressed air supplied at 0.6-0.7 MPa. The pressing stroke is continuous rather than intermittent, and pressing speed is adjustable around the rated 100 mm/s. Total machine power is 280 W. Because the stroke never pauses for a steam cycle, the machine suits continuous seam work along a garment panel.

Technical Specifications

Application Scope & Selection Tip

The primary application is seam opening and seam pressing on leather garments, including leather jackets such as the finished garment shown in the manufacturer's application materials.

Because precision temperature control adapts to multiple fabric types, the machine can also serve other fabric lines, provided the seam work fits within the 5-20 mm pressing width.

Before installation, confirm three site conditions: a compressed-air supply in the 0.6-0.7 MPa range, a power supply of AC 220V ±10% at 50/60 Hz, and garment seams that fall within the 5-20 mm pressing width.

Business Benefits For Garment Factories

• Stable seam appearance. Steam-free pressing helps prevent deformation and discoloration, supporting seam quality on leather panels where surface finish matters.
• Continuous, controllable output. The continuous stroke and adjustable speed, rated at 100 mm/s, keep the seam line moving at a pace the operator sets.
• Lower training barrier. With about 3 minutes to basic operation, training costs stay low and scheduling does not hinge on a small pool of experienced hand finishers.
• Contained energy use. The manufacturer lists energy-saving operation as a design benefit, and the machine draws 280 W in total.

FAQs

Does the XST-235-7H1 need a boiler or steam supply?

No. The machine uses steam-free pressing technology, so the pressing process runs without a boiler or a steam line.

Which fabrics can it handle?

Leather garments are the primary application. Precision temperature control lets the machine adapt to multiple fabric types, and pressing work must fit the 5-20 mm pressing width.

What installation conditions does it require?

A compressed-air supply at 0.6-0.7 MPa and a power supply of AC 220V ±10%; 50/60 Hz. Total machine power is 280 W.

How long does operator training take?

According to the manufacturer, basic operation can be learned in about 3 minutes, which keeps training costs low for new lines.

Can pressing speed be adjusted in production?

Yes. Pressing speed is adjustable around the rated 100 mm/s, and the stroke runs continuously, so operators can match the pace to the seam and the fabric.